Output Channels¶
Overview¶
The Output Channels tab displays a control strip for all eight output channels:
Output channel strip¶
Each of the eight output channels has a complete "strip" of controls:
Channel label¶
Each output channel has a customizable label displayed at the top of the channel strip. This label also appears on the matrix mixer. To change the label, click on it and type a new label (up to 12 characters).
PEQ¶
Click on this button to open the parametric EQ settings window for that output channel. There are 10 parametric EQ filters on each output channel.
If there are active parametric EQ filters, the color of the button changes to yellow. This provides an at-a-glance indication of filter status:
For more information, see the page Parametric EQ.
CROSSOVER¶
Click on this button to open the crossover settings window for that output channel.
If there are crossover filters enabled, the color of the button changes to yellow. This provides an at-a-glance indication of crossover status:
For more information, see the page Crossover.
Time delay¶
A delay of up to 30 ms can be applied to each output channel. To set the delay, click on the delay button for a channel. The delay value can be entered by moving the slider or it can be entered numerically. The up and down arrow keys can be used to change the delay in 0.02 ms increments.
Gain adjustment¶
The gain of each output channel can be set to a value between ‑72 dB and +12 dB. (0 dB, the default, is unity gain or no change in level.) To set the gain, click on the Gain value of that channel. The gain can be entered by moving the slider or it can be entered numerically. The up and down arrow keys can be used to change the gain in 0.1 dB increments.
Invert¶
Each output channel can be inverted in polarity. To invert, press the Invert button. The status is indicated by a change in color and label:
Mute¶
Each output channel can be individually muted. To mute it, press the Mute button. The status is indicated by a change in color and label:
Compressor¶
Click on this button to open the compressor settings window for that output channel.
If the compressor is enabled, the color of the button changes to yellow. This provides an at-a-glance indication of compressor status:
For more information, see the page Compressor.
Current RMS level, level meter¶
Displays the current signal level on that output channel in real time.
Info
The Flex HTx must be connected and online to display signal levels.