Front and rear panels¶
Input panel¶
-
Analog inputs. Connect an analog source here using RCA cables. Typically, the left channel is connected to input 1 and the right channel is connected to input 2. The maximum input voltage is 2.0 Vrms.
-
Optical digital input. Connect a digital source using a TOSLINK optical cable. Sample rates from 32 up to 216 kHz are supported.
-
USB port for control and audio streaming. Connect to an available USB port on your computer. This port can also be connected to a network streamer with USB output for audio playback.
-
Infrared receiver. For the remote control.
Output panel¶
- DC power. The supplied 12 VDC power supply includes a set of interchangeable power pins for USA, UK, Europe and Australia. Fit the correct pins for your country. Connect the DC plug to the 12 VDC power socket.
- Analog outputs. Connect equipment such as a power amplifier and subwoofer using RCA cables. Typically, output 1 is the left channel and output 2 is the right channel. The maximum output voltage is 2.0 Vrms.
Warning
Apply power to the miniDSP 2x4 HD only after all input and output connections have been made.